Flamed Surface Textures stones

Flamed Surface Textures stones

Flamed Surface Textures stones

Stones have different surface textures:

  1. Honed
  2. Polished
  3. Flamed
  4. Tumbled
  5. Sand Blasted
  6. Sawn
  7. Bush Hammered

Flamed Surface Textures stones

This process consists of a high temperature treatment to granite surfaces. A flame at 45°-degree angle is applied to the surface of the stone, resulting in a relief surface that appears rough and glassy and rustic—without appreciable change in colour.

Flamed Surface :A rough surface that is developed through intense heat. During fabrication, the stone is heated up and the crystals begin to pop, thus forming a rough surface. This surface is very porous and must be treated with Stone guard. This surface gives an irregular textured finish.

An increase in the resistance of the face to atmospheric chemical alteration is also achieved.

Process:Applying high temperatures to surfaces, using oxyacetylene burners over 2,500 º C, causes a thermal shock to the stone surface and the subsequent release of small slabs and splinters. This process is not “burned,” but achieves a high degree of protection against atmospheric agents.

Flamed Surface Textures stones

Honed Surface Textures stones

It is produced by grinding a surface with high grit material to a uniform specification, without producing a reflective surface. Honed stone colours are not as vibrant as polished stones. A smooth finish with a slight sheen is produced by using a polishing head. This surface is very smooth, but often very porous.

Rubbing is achieved by a process similar to polishing abrasion, but without the resultant shine. Large production machines are also called polishing trains, and these are equipped with multiple heads that mount different abrasive grain per head and rotate on fixed benches along the process chain.

For small areas, this can be performed manually by means of articulated arm polishers. These achieve flat, smooth surfaces, dull and without any visible mark, provided the tone is darker than other terminal, highlighting the structure, texture and colours of the stone. This process is often applied to polished stones that do not reach the necessary degree of crystallization, often in the case of limestone and sandstone.

We could say that rubbing down is the first step to achieving brightness. This finish is applied in compact rock, with a minimum degree of hardness. As the polishing is achieved by abrasion, and in these cases it is most common to use conventional abrasives such as silicon carbide.

It is a finish that makes the surface of natural stone smooth and matted, without or with limited reflection of light. The same method and abrasive materials are used to achieve this finish as in polished finish, but polishing stops at an earlier stage and the stone is not buffed. The surface has a lighter shade but the overall colour and depth of the stone are preserved. Tiles are smooth but quite porous and should definitely be sealed. For our clients we offer travertine tiles that are honed and filled. In general, this type of finish can be applied to different stones and is preferred for locations with heavy traffic, such as floors, stairs, thresholds. We offer a great variety of honed tiles both for interior and exterior purposes – marble, slate, limestone, travertine, granite.

Honed Surface Textures stones

Honed Surface Textures stones

Honed: Provides a flat to low sheen gloss. Different levels of gloss can be selected. This surface is very smooth, but often very porous. This texture is common in high traffic buildings. Honed floors should always be protected with Stone guard Penetrating Sealer because it has wide-open pores. Honed stone colours are not as vibrant as a polished stone.

Flamed Surface Textures stones

Rock or stone is a natural substance, a solid aggregate of one or more minerals or mineraloids. For example, granite, a common rock, is a combination of the minerals quartz, feldspar and biotite. The Earth’s outer solid layer, the lithosphere, is made of rock.

Rock has been used by mankind throughout history. The minerals and metals found in rocks have been essential to human civilisation.

Three major groups of rocks are defined: igneous, sedimentary, and metamorphic. The scientific study of rocks is called petrology, which is an essential component of geology.

Flamed Surface Textures stones

RECOMMENDED READ

Concrete
Ceramic Tile
LIMESTONE
SANDSTONE
Igneous stones
Metamorphic stones
Types of Surface Textures stones

To know more about Worlds Of Stone, visit HERE WOS

About Author: admin@worldofstones.com